Dsp Sine Wave Inverter / Ups
We have developed Inverter, HUPS, from 300VA to 5KVA Single phase with below features:-
- Best designed for energy savings and suitable for frequent power fluctuations
- Output waveform: Pure sine wave
- Frequency: 50Hz±1%,
- Unique “DSP Technology” zero humming of electrical & electronic products
- Battery Gravity Builder with overcharge and deep discharge protections
- Less energy consumption in a year as compared to any other brand
- Selectable charging mode for different battery technologies (Flat/Tubular battery) and capacities (100 Ah to 250 Ah) using selector switch
- 10-15% higher back up than any other competitor brands
- Runs juicer/ Mixer Grinder easily up to 900W rating
- Charges battery from as low as 70V mains
- Enhanced Temperature Protection.
- Safety :- MCB for protection from Input main
Specifications:-
| PARAMETERS | MODELS | column_3 | column_4 | column_5 | column_6 | column_7 | column_8 |
| Model | R925/12V | R1125/12V | R1325/12V | R1825/24V | R2225/24V | R2625/24V | R3725/48V |
| No Load Current | ≤ 2.0A | ≤ 2.5A | ≤ 2.5A | ||||
| Output Voltage @ No Load | ≤ 240VAC @12.0VDC | ≤ 240VAC @24.0VDC | ≤ 240VAC @48.0VDC | ||||
| Battery Current @ Full Load | 44A ±2A | 54A ±2A | 64A ±2A | 54A ±2A | 64A ±2A | 75A ±2A | 60A ±2A |
| Over Load Alarm | 46A ±2A | 56A ±2A | 66A ±2A | 56A ±2A | 66 ±2A | 77A ±2A | 62A ±2A |
| Battery Low Alarm | 10.6 ±0.2V | 21.2 ±0.2V | 21.2 ±0.2V | 21.2 ±0.2V | 42.4 ±0.2V | ||
| Battery Low Shutdown | 10.4 ±0.2V | 20.8 ±0.2V | 20.8 ±0.2V | 20.8 ±0.2V | 41.6 ±0.2V | ||
| Short Circuits Protection | Yes | ||||||
| Inverter Output Frequency | 50 ± 0.1 Hz | ||||||
| UPS MODE | |||||||
| Mains Input Voltage Range | 170V To 265V | ||||||
| Mains AC Low Cut | 170VAC ±10VAC | ||||||
| Mains AC Low Cut Recovery | 180VAC ±10VAC | ||||||
| Mains AC High Cut | 265VAC ±10VAC | ||||||
| Mains AC High Cut Recovery | 255VAC ±10VAC | ||||||
| Maximum Change Over Time | <8msec | ||||||
| W-UPS MODE | |||||||
| Mains Input Voltage Range | 90V To 290V | ||||||
| Mains AC Low Cut | 90VAC ±10VAC | ||||||
| Mains AC Low Cut Recovery | 110VAC ±10VAC | ||||||
| Mains AC High Cut | 290VAC ±10VAC | ||||||
| Mains AC High Cut Recovery | 280VAC ±10VAC | ||||||
| Maximum Change Over Time | <20msec | ||||||
| CHARGING MODE | |||||||
| Charging Current@220VAC | 15.0 ±2A | ||||||
| Boost Voltage (Tub Mode ) | 14.4V ±0.2V | 28.8V ±0.4V | 57.6V ±0.8V | ||||
| Boost Voltage (LA Mode ) | 14.0V ±0.2V | 28.0V ±0.4V | 56V ±0.8V | ||||
| Boost Mode ( Enable Tub Mode) | 15.0V ±0.2V | 30.0V ±0.4V | 60.0V ±0.8V | ||||
| Boost Mode ( Enable LA Mode) | 15.0V ±0.2V | 30.0V ±0.4V | 60.0V ±0.8V | ||||
| Float Voltage | 13.6V ±0.2V | 27.2V ±0.4V | 54.4V ±0.8V | ||||
| Short Circuit | Yes | ||||||
| PROTECTION | |||||||
| Battery Low Cut Off | 1 Time | ||||||
| Over Load (Auto Retries) | 4 Times | ||||||
| Short Circuits (Auto Retries) | 3 Times | ||||||
| Over Temperature | 3 Times | ||||||
| Battery Over Charge | Yes | ||||||
| Input Protection | Yes (Mains Fuse Blown/MCB Trip in Case of Short Circuit in Mains Mode) |
